Home Detailed application Diamond Trim Application F300/F600/F900 - Trim Application

F300/F600/F900 - Trim Application

Application Instructions

The F trim is a flat flashing, mainly used at the intersection of a pitched roof and flat roof often found on dormers. The F trim should not be laminated over completely as it will crack. It is nailed or stapled to the deck and bent up the roof slope. In this situation, the F trim also acts as an expansion facility and must only be fixed to the deck along the bottom edge. There are many other applications for F trim including vertical details where laminating would be time consuming, under the feet of air conditioning units to enable re-roofing without disconnecting, and use on some parapet wall details etc. The trim should be nailed to the deck around its edges and bandaged over any joins or nail penetrations.

Any unlaminated trim can be topcoated with the rest of the roof.

Trim Details

F300/600/900: Flat sheeting supplied in 300, 600 and 900mm widths in 20m rolls.

F300-2

  a, mm
F300 300
F600 600
F900 900

F300/600/900 typical typical application

F300_appl

F300_appl_1