Home Detailed application Diamond Trim Application B230/260 - Trim application

B230/260 - Trim application

Application Instructions

The B type trim is an up-stand trim, fitted to contain and direct the flow of water to a gutter. A single batten is fixed level with the top edge of the deck. Apply 30mm beads of trim adhesive to the batten every 300mm, rub the trim into place and nail through the top of the trim into the decking. Do not nail through the front of the trim. If a ladder is likely to be leant against a B type trim for regular access to the roof, the trim will need to be reinforced to avoid deformation. The trim can either be doubled up by slotting a section of extra trim within the section where the ladder will be used or it can be reinforced with an extra layer of GRP laminate and then tissue to maintain a smooth finish. Alternately, a wooden batten can be shaped and fitted into the ridge of the trim to ensure that it remains rigid.

Trim Details

B230: The smallest size of raised edge trim fitted to the edges of the roof to contain and direct the flow of water.

B260: The standard size raised edge trim.

B230-B260-7

  a, mm b, mm c, mm
B230 95 105 15
B260 95 125 15

B230/B260 typical application

B230-B260-2

B230-B260-1

buy kamagra cialis buy cialis canada - millpharmacy.com cheap ialis.com