Home Detailed application Technical Detail Pre-formed PVC Pipe Outlet

Pre-formed PVC Pipe Outlet

Application Instructions

The outlet should be constructed before the roof is laid. Place a suitable PVC pipe of a polished glass sheet and apply a bead of PU Trim adhesive around the outside of the pipe at least 100mm from the base of the pipe. Lay the laminate up around the outside of the pipe and ensure it is thoroughly consolidated into the PU Trim Adhesive and sealed around the pipe. Apply enough laminate around the bottom of the pipe to form a base that can later be nailed to the deck. The pipe can be fitted in place when the remaining trims are fitted to the roof. The outlet should be nailed to the decking around its perimeter and incorporated into the laminate.

Forming the PVC Outlet

PVC-pipe-outlet-1

PVC-pipe-outlet-3

Fitting the Outlet to the Roof

PVC-pipe-outlet-4_